Diagnostics
190
9.3
Topology Discovery
RM Web L3P
Release
4.1
03/08
If
X devices with active topology discovery function and
X devices without active topology discovery function
are connected to a port, the topology table hides the devices without ac-
tive topology discovery.
If
X only devices without active topology discovery are connected to a port,
the table will contain one line for this port to represent all devices. This line
contains the number of connected devices.
MAC addresses of devices that the topology table hides for the sake of
clarity, are located in the address table (FDB) . (see page 71 „Filters for
MAC addresses“).