Basic Settings
RM Web L3P
Release
4.1
03/08
2.2
Network
23
You enter the name applicable to the DHCP protocol in the "Name" line in
the system dialog of the Web-based interface.
The "VLAN ID" frame enables you to assign a VLAN to the agent. If you
enter the illegal VLAN ID "0" here, the agent can be accessed by all
VLANs.
The HiDiscovery protocol allows you to assign an IP address to the device
on the basis of its MAC address. Activate the HiDiscovery protocol if you
want to assign an IP address to the device from your PC with the enclosed
HiDiscovery software (setting on delivery: active).
To Next Page
Loading...
