Hitachi DZ-MV2000E - ARRANGING ORDER OF SCENES (MOVE)

118
1
ARRANGING ORDER OF SCENES (MOVE)
You can move scenes only when “Category: All” is specified.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the f/e/d/c/A buttons to
choose “Switch” on the “PlayList” menu
screen, and then press the A button.
Select the play list to be edited, and then press
the A button.
4 Select the scene to be moved.
You can also select multiple scenes (see pages
95 and 108).
5 Press the MENU button.
6 Choose “Scene”, “Edit”,
“Move”, and then press
the A button.
7 The “Move Scenes”
screen will appear: If
you are sure you want
to move the scene, press the A button.
If you want to change the scene selected in
step 4, you can do it on this screen.
8 Move the “ ” mark to
the position where you
wish to move the scene,
and then press the A
button.
9 The screen for verifying
move will appear:
Choose “YES”, and then
press the A button.
Choose “NO” to cancel
move.
After Yes or No setting, the scene select screen
will be restored.
Repeat steps 7 – 9 to move another scene.
10Press the C button to quit.
Note:
• If you press the MENU button before pressing the
A button in step 7, the submenu screen will appear
(p. 100).
• Only scenes on play list can be moved.
• Scenes can be moved only when “Category:All” is
specified (p. 125).
Scene
RAM
ENTER RETURN
Ed i t
Ef fect
Copy
Sel ect
De t a i l
Divide
De l e t e
Comb i ne
M ove
ETC
Se lect Insert Point 006/019
RAM
ENTER RETURN
ENTER
Move scenes?
Move Scene
YES NO