Hitachi DZ-MV2000E - Initial Settings; TURNING DVD VIDEO CAMERA;RECORDER OFF AUTOMATICALLY (POWER SAVE)

89
123
Initial Settings
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose
“Beep” on the “Initial
Setup” menu screen,
and then press the A
button.
2 Select “On” or “Off”, and then press the A
button.
3 Press the MENU button to end the setting.
Note:
The “Beep” setting will be stored in memory even when
the DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose
“Power Save” on the
“Initial Setup” menu
screen, and then press
the A button.
2 Select “On” or “Off”, and then press the A
button.
3 Press the MENU button to end the setting.
Note:
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function,
set the power switch to “OFF”, and then set it to “O”,
“N” or “P”
• The Power Save setting will not appear in the on-
screen information display.
• The Power Save setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
Setting Content
On
Beep is heard when the power switch is changed over, the REC button is
pressed, etc.
Off
No beep is heard.
On
Of f
RAM
Power Save
Beep
ENTER RETURN
Demo Mode
Reset
Language
Record LED
Ini t ial Setup
Setting Content
On
To engage power save. If the DVD video camera/recorder is left in the recording
pause status without being operated for 5 minutes, it will automatically turn off to
prevent the battery from discharging needlessly.
Off To cancel power save.
On
Of f
RAM
Power Save
Beep
Record LED
ENTER RETURN
Demo Mode
Reset
Language
Ini t ial Setup