Hitachi DZ-MV2000E - Changing Display Format of Date and Time

34
CHANGING DISPLAY FORMAT OF DATE AND TIME
You can select one of three date display formats: day/month/year, month/day/year or year/
month/day. Associated with the selected date display, the time display format will also change as
follows:
1 Press the MENU button.
The menu screen will appear.
2 Use the f/e/d/
c buttons to choose
“Date Mode” on the
“Date Setup” menu
screen, and then press
the A button.
The options will appear on the right of “Date
Mode”: The Z mark will be attached to the
currently selected option.
3 Use the f/e/d/
c buttons to select the
desired date display
format, and then press
the A button.
The menu screen for
setting date will be restored, and the “Date
Mode” has been changed as you designated.
4 Press the MENU button to switch off the
menu screen.
Note:
If the date display format has been changed, the display
format during playback as well as during recording will
also be changed (see page 48).
Date display format Example of display
D/M/Y
17:00
30/ 9/2006
M/D/Y
5:00PM
9/30/2006
Y/M/D
PM 5:00
2006/ 9/30
RAM
D/M/ Y
Y/M/D
Date Set
ENTER RETURN
Date Mode
M/D/ Y
Da te Se t up
RAM
ENTER RETURN
Date Mode
M /D/Y
Da te Se t up
Date Set