Hitachi DZ-MV2000E - SELF-TIMER

85
3
SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You can switch the still recording quality only when using card.
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose
“Quality” on the
“Record Functions
Setup” menu screen,
and then press the A button.
2 Choose the option you want, and then press
the A button.
3 Press the MENU
button to end the
setting.
Note:
The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
13
SELF-TIMER
You can record photos using the self-timer function, as with ordinary cameras.
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose “Self
Timer” on the “Record
Functions Setup” menu
screen, and then press
the A button.
2 Select “On”, and then press the A button.
The self-timer will be set.
3 Press the MENU button to end the setting.
4 Press the PHOTO button.
The recording indicator at the front of DVD
video camera/recorder will blink.
The self-timer indicator will start to count
down, and recording will commence
approximately 10 seconds later.
Note:
• You can also check that self-timer has been set by
reviewing the on-screen information.
• To release the self-timer mode, choose “Off” on the
menu screen or turn DVD video camera/recorder off.
• To suspend self-timer, press the PHOTO button again
before recording starts, or press the C button.
It is recommended that you use “FINE” when recording vital images. (p. 28 “SIZE AND
QUALITY OF PHOTOS”)
Record Funct i ons Setup
N O R M
EC O
FINE
Qua l i t y
Se l f T i m er
O SD O utput
ENTER RETURN
999
REM
NORM
8:00
30/ 9 /2006
Still recording quality
The self-timer function is valid only when recording photos (stills).
Se l f T i mer
On
Of f
RAM
OSD Ou t p u t
ENTER RETURN
Record Funct i ons Setup
10
999
REM
8:00
30/ 9 /2006
Self-timer recording