Hitachi DZ-MV2000E - SETTING ON-SCREEN DISPLAY OUTPUT ON OR OFF (OSD OUTPUT)

86
123
SETTING ON-SCREEN DISPLAY OUTPUT ON OR OFF (OSD OUTPUT)
If you connect this DVD video camera/recorder to a TV to view images on TV screen, you can
switch off the on-screen information (displayed in the viewfinder or on the LCD screen) from the TV
screen.
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose “OSD
Output” on the “Record
Functions Setup” menu
screen, and then press
the A button.
2 Choose “On” or “Off”, and press the A
button.
3 Press the MENU button to end the setting.
Note:
• The “OSD Output” setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Even if “Off” is chosen, the on-screen information will
appear during playback. See page 58 for playback on-
screen information display.
• Even after the on-screen information is removed from
the TV screen, it will still appear in the viewfinder or
on the LCD screen.
RAM
ENTER RETURN
On
Of f
OSD Ou t p u t
Record Funct i ons Setup
V I DEO Mode
16:9
3 0 MIN
0:00:00
REM
FINE
8:00
30/ 9/2006
3 0 MIN
0:00:00
REM
FINE
8:00
30/ 9/2006
LCD screen or viewfinder
“On” setting “Off” setting
TV screen TV screen