EasyManuals Logo

HOLDEN WM II 2012 Series User Manual

HOLDEN WM II 2012 Series
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #292 background imageLoading...
Page #292 background image
Black plate (46,1)
Holden WM Caprice Owner Manual (MY12.5) - 2012 - CRC 1st Edition - 6/28
/
12
10-46 Vehicle Care
A
B
C
F
G
E
D
The kit includes:
A. On/off switch
B. Tyre sealant canister
C. Sealant-air delivery hose
D. Air-only delivery hose
E. Pressure gauge
F. 12 volt power connection
G. Air compressor
Tyre sealant
The sealant cannot seal sidewall
damage, large punctures, or a tyre
that has unseated from the wheel.
Follow the safety instructions on the
tyre sealant canister.
Check the expiry date on the tyre
sealant canister before use. The
tyre sealant canister must be
replaced before its expiry date.
There is only enough sealant to seal
one tyre.
After usage, the tyre sealant
canister and sealant-air delivery
hose must be replaced as an
assembly.
Replacement tyre sealant canisters
are available from a Holden Dealer.
Temporary puncture repair
A
C
F
1. All passengers must exit the
vehicle.
2. Inspect the damaged tyre.
Do not remove any objects that
have penetrated the tyre.
3. Unwrap the sealant-air delivery
hose (C) from the side of the
compressor.
4. Remove the 12 volt power
connection (F) from the kit.
Do not connect to the power
socket yet.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HOLDEN WM II 2012 Series and is the answer not in the manual?

HOLDEN WM II 2012 Series Specifications

General IconGeneral
BrandHOLDEN
ModelWM II 2012 Series
CategoryAutomobile
LanguageEnglish

Related product manuals