Black plate (61,1)
Holden WM Caprice Owner Manual (MY12.5) - 2012 - CRC 1st Edition - 6/28
12
Vehicle Care 10-61
{
WARNING
As soon as possible after
changing a wheel, have the wheel
nuts tightened with a torque
wrench to 170 ± 20 Y (Newton
metres) and the spare wheel
retainer tightened with a torque
wrench to 8.5 ± 0.5 Y.Wheel
nuts must be tightened evenly to
the correct torque in the
sequence shown (refer to
Step 29), as wheel nuts which
have not been tightened correctly
could eventually allow the wheel
to come off while the vehicle is
moving.
Trolley jack or vehicle hoist
A
A. Front of vehicle
To raise the vehicle, position the
jack under the centre of the
suspension cross member or hoist
pad locations.
{
WARNING
Do not jack under the suspension
control arms. Do not get under a
vehicle that is supported by a
jack. No person should place any
portion of their body under a
vehicle that is supported by
ajack.
To Next Page
Loading...
Need help?
General
