Honeywell 301C User Manual

60 301C User Manual 510324
Honeywell 4/07
System Programming
Config Menu
Selecting the first line of the first screen lets you select from three
different display modes: Manual scroll, 3-second scroll, 5-second
scroll. If you choose Manual scroll mode, the screen will only advance if
you press on the arrow keypad buttons. If you choose 3 or 5 second
scroll modes, the screens will automatically scroll display readings for
all devices connected to the controller after 3 or 5 seconds.
3 or 5 second scroll modes do not prevent you from using the keypad
arrows to return to a previous screen or move ahead through the
screens manually.
Selecting the second line lets you adjust the date and time in a new
screen; Date and Time. When a number is flashing, you can change
the value using the up/down keypad arrows. You can change the year,
month, day and the hour, minute and second values.
The controller does not manage Daylight Savings Time, therefore,
users must manually adjust any time changes.
Selecting the third line allows you to change the display language. If the
display is already in English, it will then display the Menu français
option (and vice-versa). Simply scroll to the line and press Enter to
change the language.
6. Config
Manual scroll mode
Set Date and Time
Menu français
Date and Time
2005-11-21 11:47:36
(ISO 8601 standard)

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)