Honeywell 301C User Manual

76 301C User Manual 510324
Honeywell 4/07
System Programming
Bacnet Menu
The next screen allows you to disable or enable the device DHCP
(Dynamic Host Configuration Protocol).
• Simply press Enter to change the field value. Please consult your
IT department for details concerning this option.
9. BACNet
-DHCP : disabled-
Enable DHCP

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)