4. OPERATION
Force Relays Calibration Menu
Caution: Ensure that when forcing a relay response that the effects on the network and
controller are understood, e.g. alarm activation, etc.
Provides the means to test the operation of the Transmitter Unit's relays by forcing them in turn to be
energised/de-energised.
Relays return to normal set states when in Main Menu or after a timeout period of approximately
5 minutes
.
Force Relays
ok
Select relay to
test
Force Relays screen
Test another relay?
Yes
No
ok
esc
Calibration Menu
ok
Use up/down
buttons
Select relay
state
Use up/down
buttons
To Next Page
Loading...
