Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.1. C300 Controller Block
100
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
Plain Text
Parameter Name
User
Configurable
Notes
Non-FTE MART Statistics
Address Count
NONFTEMARTADDRC
OUNT
No
Shows number of IP
addresses contained in
the non-FTE MART.
Max Depth
NONFTEMARTMAXDE
PTH
No
Shows maximum depth of
the non-FTE MART has
reached (the largest
number of entries in the
table).
Average Depth
NONFTEMARTAVGDE
PTH
No
Shows average depth of
the non-FTE MART (the
average number of entries
in the table).
Address Collisions
NONFTEMARTCOLLC
OUNT
No
Shows number of
collisions that have
occurred when hashing
the non-FTE MART
Current FTE Traffic
LAN_A Tx Rate
(kBit/sec)
Note: This parameter
is not supported in
this release.
LANATXRATE
No
Indicates communication
transmission rate in
kilobits per second (kbps)
for port A (Yellow Tree
Port) on the FTE Bridge.
LAN_B Tx Rate
(kBit/sec)
Note: This parameter
is not supported in
this release.
LANBTXRATE
No
Indicates communication
transmission rate in
kilobits per second (kbps)
for port B (Green Tree
Port) on the FTE Bridge.
LAN_A Rx Rate
(kBit/sec)
Note: This parameter
is not supported in
this release.
LANARXRATE
No
Indicates communication
receive rate in kilobits per
second (kbps) for port A
(Yellow Tree Port) on the
FTE Bridge.

Honeywell C300 Specifications

General

Memory	512 MB RAM, 512 MB Flash
Type	Process Controller
Communication Ports	Ethernet, Serial
Power Supply	24V DC
Inputs	Analog and Digital
Outputs	Analog and Digital
Communication	Ethernet, Serial, HART
Redundancy	Supported (Hot Standby)