Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.1. C300 Controller Block
R500
April 2017
Series 8 C300 Controller User's Guide
Honeywell
107
Plain Text
Parameter Name
User
Configurable
Notes
IP Statistics -
(Provides packet delivery services between nodes.)
Datagrams Received
from Below
IPINRECEIVES
No
Total number of input
datagrams received from
connected nodes,
including those received in
error.
Datagrams Format
Errors Drops
IPINHDRERRORS
No
Number of input
datagrams discarded due
to errors in their Internet
Protocol (IP) headers,
including bad checksums,
version number mismatch,
other format errors, time-
to-live exceeded, errors
discovered in processing
their IP options, and so on.
Datagrams
Misdelivery Drops
IPINADDRERRORS
No
Number of input
datagrams discarded
because the IP address in
their IP header's
destination field was not a
valid address to be
received at this entity.
Unknown Protocol
Datagrams
IPINUNKNOWNPORTS
No
Number of locally-
addressed datagrams
received successfully but
discarded because of an
unknown or unsupported
protocol.
Datagrams
Discarded for Resrcs
IPINDISCARDS
No
Number of input IP
datagrams for which no
problems were
encountered to prevent
their continued
processing, but which
were discarded; for
example, for lack of buffer
space.

Honeywell C300 Specifications

General

Memory	512 MB RAM, 512 MB Flash
Type	Process Controller
Communication Ports	Ethernet, Serial
Power Supply	24V DC
Inputs	Analog and Digital
Outputs	Analog and Digital
Communication	Ethernet, Serial, HART
Redundancy	Supported (Hot Standby)