Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.1. C300 Controller Block
R500
April 2017
Series 8 C300 Controller User's Guide
Honeywell
109
Plain Text
Parameter Name
User
Configurable
Notes
Datagrams
Fragmented
IPFRAGOKS
No
Number of IP datagrams
that have been
successfully fragmented at
this entity.
Datagram
Fragmentation Fails
IPFRAGFAILS
No
Number of IP datagrams
that have been discarded
because they needed to
be fragmented at this
entity but could not. For
example, because their do
not Fragment flag was set.
Fragments Created
IPFRAGCREATES
No
Number of IP datagram
fragments that have been
generated as a result of
fragmentation at this
entity.
Routing Entries
Discarded
IPROUTINGDISCARDS
No
Number of routing entries
which were chosen to be
discarded even though
they are valid.
ICMP Statistics -
(Controls transmission of error and control messages between hosts and gateways.)
Messages Received
ICMPINMSGS
No
Total number of ICMP
messages which the entity
received.
Messages With
Format Errors
ICMPINERRORS
No
Number of ICMP
messages which entity
received but determined
as having ICMP-specific
errors such as bad ICMP
checksums and bad
length.
Dest. Unreachable
Msgs Recvd
ICMPINDESTUNREAC
HS
No
Number of ICMP
Destination Unreachable
messages received.

Honeywell C300 Specifications

General

Memory	512 MB RAM, 512 MB Flash
Type	Process Controller
Communication Ports	Ethernet, Serial
Power Supply	24V DC
Inputs	Analog and Digital
Outputs	Analog and Digital
Communication	Ethernet, Serial, HART
Redundancy	Supported (Hot Standby)