Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.4. IOLINK Block
140
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
Plain Text
Parameter Name
User
Configurable
Notes
Priority IOMs
NUMPRIORITYIOM
No
Shows the number of
IOMs configured as
Priority IOMs on the
IOLINK.
I/O Link Cable Color
IOLINKCOLOR
No
Shows the link cable
color assigned to the
IOLink number.
I/O Link Number
LINKNUM
No
Shows the link number
within the I/O Link
Interface.
I/O Link State
STATE
No
The current state of the
IOLink, (NOTLOADED,
ONLINE)
Simulation State
SIMSTATE
No
Specifies the current
state of the simulation.
I/O Link Soft Fail Errors
(Refer to the Troubleshooting section for more information.)
Duplicate IOL
Address
DUPIOLADDR
No
Indicates if a duplicate
IOLink address has
been detected.
IOL Channel A
Failure
IOLCHNFAILA
No
Indicates if Channel A
of the IOLink has failed.
IOL Channel B
Failure
IOLCHNFAILB
No
Indicates if Channel B
of the IOLink has failed.
IOL Maximum Errors
Exceeded
IOLMAXERR
No
Shows the I/O link has
exceeded the maximum
error limit.
Not Active Supervisor
NOTACTSUPV
No
Indicates that the IOL
interface daughter card
could not transition into
the active supervisor
role.

Honeywell C300 Specifications

General

Memory	512 MB RAM, 512 MB Flash
Type	Process Controller
Communication Ports	Ethernet, Serial
Power Supply	24V DC
Inputs	Analog and Digital
Outputs	Analog and Digital
Communication	Ethernet, Serial, HART
Redundancy	Supported (Hot Standby)