Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.4. IOLINK Block
146
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
Plain Text
Parameter Name
User
Configurable
Notes
Channel B- Edges
SECIFCHNMNB
No
The number of I/O link
channel B missed
minus edge transitions
encountered by the
secondary link
interface.
Channel B+ Edges
SECIFCHNPLB
No
The number of I/O link
channel B missed and
the edge transitions
encountered by the
secondary link
interface.
Last Error
SECIFCOMMERR
No
The last I/O link
communications error
experienced by the
secondary link
interface.
Active Supervisor Information
Periodic Swap
Enabled
PERSWAPENB
No
Indicates if the periodic
cable swap diagnostic
is enabled or disabled.
Channel A Total
Errors
TOTCHNERRA
No
The total I/O Link Errors
on channel A.
Channel A Total
Silences
TOTCHNSILA
No
The total I/O Link
silences on channel A.
Channel A- Total
Edges
TOTCHNMNA
No
The total I/O Link
missed minus edge
transitions on channel
A.
Channel A+ Total
Edges
TOTCHNPLA
No
The total I/O Link
missed and the edge
transitions on channel
A.
Channel B Total
Errors
TOTCHNERRB
No
The total I/O Link errors
on channel B.

Honeywell C300 Specifications

General

Memory	512 MB RAM, 512 MB Flash
Type	Process Controller
Communication Ports	Ethernet, Serial
Power Supply	24V DC
Inputs	Analog and Digital
Outputs	Analog and Digital
Communication	Ethernet, Serial, HART
Redundancy	Supported (Hot Standby)