EXCEL CARE CONTROL ICONS ALPHABETIC REFERENCE
217 74-5577–33 (US)
EN2B-0184 GE51 R0518 (Europe)
3. Define Xa by clicking the left and right arrows in the scroll bar just below the X
axis. As you click, the value of Xa changes. You can also click the gray area in
the scroll bar or click the white box (thumb) in the scroll bar and move it to the
desired position.
Define Xb by clicking the lower scroll bar. You can use the same techniques as
for the other scroll bar.
The a and b parameters establish the characteristics' left and right pivot points.
Xa must be less than Xb.
RESULT: The values in the boxes to the left and right of the horizontal scroll
bars change. A line appears in the graph to represent the curve
you created.
Tip ⇒ If desired, you can change the Xp value that appears above the
New button. The Xp value sets the maximum value for all three
outputs. Click the value in the box and type a new value to change
it. Click Scale to save the entries.
The Xb values change to match the new maximum.
4. Define Ya by clicking the scroll bar on the left near the left-hand border of the
dialog box. You can use the same techniques as for the other scroll bars.
Define Yb by clicking the scroll bar on the right near the left-hand border of the
dialog box.
Ya can be higher or less than Yb.
5. If desired, select another Y output and define its curve.
6. Click OK to save.
Creating a Sequence (Excel Web / Excel Web II) 1. Enter the values for sequence.
2. Click OK to confirm your entries.
To Next Page
Loading...
