Honeywell GX-Series User Manual

GX-Series Control Panel Installation and Setup Guide
E-2
PCBs Weight Order Code
Ethernet.........................................................................................1.8 oz (56g) E080-2
Size:..............................................4.76 x 3.54 x .59 in (121 x 90 x 15mm)
NOTE: The above weights and order codes are from the populated Printed Circuit Board (PCB) only.
Device
Quiescent
Current (mA) Device
Quiescent
Current (mA)
GX-48 100
GX-520 210
GX RIO (C072-A1) (Note 1) 30 TouchCenter (CP041-A1) 105
Mk7 keypad (CP037) 70 Door Control Module (C080) 15
Ethernet Module (E080-2) 155
Table E-1. Current Consumption
NOTES: 1. Measured with no load on zone input.
2. Not communicating.
RIO DCM Keypad Ethernet
Width:
160mm 6 ¼” 162
mm
6.4” 93mm 3 5/8” 121 mm 4 ¾”
Height:
151mm 6” 150
mm
5.9” 150mm 6” 90 mm 3 ½”
Depth:
40mm 1 ½” 39
mm
1.5” 31mm 1 ¼” 16 mm 5/8”
Weight:
(approx)
300g 11oz 270g 9.5oz 180g 6oz 60g 2oz
Humidity:
0-85% 0-85% 0-85% 0-85%
Nominal
Supply
Voltage:
12 VDC 12 VDC 12 VDC 12 VDC
Current:
(Maximum)
730mA 130mA 90mA
(buzzer +
backlight)
200mA
(During Flash
upgrade only)
Current:
(Nominal)
30mA 40mA 70mA
(backlight on)
155mA
Current
outputs:
(Maximum)
Output 1 400mA
Output 2 100mA
Output 3 100mA
Output 4 100mA
45mA x 2 N/A N/A
Table E-2. Electrical Specifications

Honeywell GX-Series Specifications

General

Brand	Honeywell
Model	GX-Series
Category	Control Panel
Language	English