Honeywell UDC2300 User Manual

Installation
12/00 UDC2300 Controller Product Manual 5
2.2 Model Number Interpretation
Introduction
Write the model number into the spaces provided in Figure 2-1 and compare it to the model
number interpretation. This information will also be useful when you wire your controller.
0
DC2 3
X
External Interface
0 _ =
None
1 _ =
RS422/485 ASCII / Modbus
2 _ =
Auxiliary Output or Digital Input
Software Options
_ 0 =
Single Display (includes Accutune II on DC230B)
_ A =
Dual Display, MA, + Accutune II
_ B =
Setpoint Programming (SPP), Dual Display,
MA, Accutune II
Manuals
0 _
= English
F _
= French (Europe)
G _
= German (Europe)
T _
= Italian (Europe)
S _
= Spanish (Europe)
Certificate
_ 0
= None
_ C
= Certificate of
Conformance (F3391)
Options
0 _ _ _ _ _ _
= 90 to 264 Vac Power
1 _ _ _ _ _ _
= 24 Vac/dc Power
(
requires Alarms plus IN 2)
_ 0 _ _ _ _ _
= UL and CE
_ A _ _ _ _ _
= UL, CE, CSA and (FM pending)
_ _ 0 _ _ _ _
= None
_ _ T _ _ _ _
= Customer ID Tag
_ _ _ 0 _ _ _
= None
_ _ _ F _ _ _
= Rear Terminal Cover
_ _ _ _ 0 _ _
= Gray Elastomer Bezel
_ _ _ _ B _ _
= Blue Elastomer Bezel
_ _ _ _ T _ _
= Tan Elastomer Bezel
_ _ _ _ _ 0 _
= Future
_ _ _ _ _ _ 0
= Future
B =
Basic Controller Model
L =
Limit Controller Model
I =
Digital Indicator Model
Output #1
C _ =
Current
E _ =
Relay, E-M
A _ =
Relay, SS 1 amp
S _ =
Relay, SS 10 amp
T _ =
Open Collector Output
Output #2 or Alarm #2 and Alarm #1
_ 0 =
No additional outputs or alarms
_ E =
Relay, E-M and Alarm #1
_ A =
Relay, SS 1 amp and Alarm #
1
_ S =
Relay, SS 10 amp and Alarm #1
_ T =
Open Collector Output and Alarm #1
PV Input
1 _ = T/C, RTD, Radiamatic, mV, 0-5 V, 0-20 mA, 4-20 mA
2_ = T/C, RTD,Radiamatic, mV, Volts, milliamps, 0-10 Volts
Optional Input 2
_ 0 = None
_ 1 = 0-5 V, 1-5 V, 0-20 mA, 4-20 mA
None
0 _ =
Figure 2-1 Model Number Interpretation

Honeywell UDC2300 Specifications

General

Brand	Honeywell
Model	UDC2300
Category	Controller
Language	English