Installation
12/00 UDC2300 Controller Product Manual 3
2 Installation
2.1 Overview
Introduction
Installation of the UDC2300 consists of mounting and wiring the controller according to
the instructions given in this section. Read the pre-installation information, check the
model number interpretation (Subsection 2.2), and become familiar with your model
selections, then proceed with installation.
What’s in this section?
The following topics are covered in this section.
TOPIC See Page
2.1 Overview 3
2.2 Model Number Interpretation 5
2.3 Preliminary Checks 6
2.4 Control and Alarm Relay Contact Information 8
2.5 Mounting 9
2.6 Wiring 11
2.7 Wiring Diagrams
Composite Wiring Diagram
AC Line Voltage
Input 1 Connections
Input 2 Connections
Relay Output
Electromechanical
Solid State
Open Collector
Current Output Connections
External Solid State Relay Output Option
Three Position Step Control Connections
Alarm and Duplex Output Connections
12
13
13
14
14
14
15
15
16
16
17
17
To Next Page
Loading...
Need help?
General
