Operation
12/00 UDC2300 Controller Product Manual 53
6 Operation
6.1 Overview
Introduction
This section gives you all the information necessary to operate your controller. Review
the Operator Interface and Key Functions shown in Figure 3-1. Make sure you are
familiar with the indicator definitions listed in Table 5-2.
What’s in this section?
The following topics are covered in this section.
TOPIC See Page
6.1 Overview 53
6.2 Single Display Functionality 54
6.3 Start Up Procedure for Operation 54
6.4 Control Modes 57
0 Setpoints 58
6.6 Timer 59
6.7 Accutune 61
6.8 Fuzzy Overshoot Suppression 64
6.9 Using Two Sets Of Tuning Constants 64
6.10 Alarm Setpoints 66
6.11 Three Position Step Control Algorithm 67
6.12 Setting A Failsafe Output Value For Restart After A Power Loss 68
6.13 Setting Failsafe Mode 69
To Next Page
Loading...
