horsch LEEB LT - Page 11

Lighting (optional)
¾ Submenu for machines of variant CCS Pro, see 3.2.6
¾ Submenu for machines of variant CCS and ECO, see 3.2.7
Operating data counter
¾ Information on the area processed and working time / operating hours
¾ Submenu, see 3.2.8
a
b
c
Application quantity
(a) Nominal application quantity
(b) Actual application quantity
(c) Under/overdosing the nominal application quantity with the multi-function
handle
The bar graph shows the deviation of the actual from the nominal application
quantity (grey area).
¾ Operate the display to accept the value of the application quantity.
The system will then be controlled by using the application quantity and not
the spraying pressure. A green mark appears for this purpose.
¾ Operate the display again to change the nominal application quantity.
¾ Submenu, see 3.2.9
Spraying pressure
Display of the current spraying pressure (actual pressure).
¾ Operate the display to accept the value of the 󰘰xed spraying pressure.
The system will then be controlled by using the 󰘰xed spraying pressure and
not the application quantity. A green mark appears for this purpose.
¾ Operate the display again to change the 󰘰xed spraying pressure.
¾ Submenu, see 3.2.10
The red bars indicate areas (depending on the automatic nozzle selection) that
shall/must not be reached during operation.
Speed
Display of the currently driven speed.
¾ Touch the display to access the submenu.
¾ Submenu, see 3.2.11
The red bars indicate areas (depending on the automatic nozzle selection) that
shall/must not be reached during spraying operation.
b
c
a
35.75
9930
Filling the spraying mixture container
(a) current 󰘰lling level
(b) reach in ha (area)
(c) reach in m (distance)
¾ Touch the display to access the submenu for 󰘰lling.
¾ Submenu for machines of variant CCS Pro, see 3.2.12
¾ Submenu for machines of variant CCS, see 3.2.13
¾ Submenu for machines of variant ECO, see 3.2.14
8 9