201
[CEa2-GigabitEthernet2/1/2] ip address 10.110.4.2 24
[CEa2-GigabitEthernet2/1/2] pim sm
[CEa2-GigabitEthernet2/1/2] quit
# Assign an IP address to GigabitEthernet 2/1/3, and enable PIM-SM on the interface.
[CEa2] interface gigabitethernet 2/1/3
[CEa2-GigabitEthernet2/1/3] ip address 10.110.12.1 24
[CEa2-GigabitEthernet2/1/3] pim sm
[CEa2-GigabitEthernet2/1/3] quit
# Assign an IP address to Loopback 1, and enable PIM-SM on the interface.
[CEa2] interface loopback 1
[CEa2-LoopBack1] ip address 22.22.22.22 32
[CEa2-LoopBack1] pim sm
[CEa2-LoopBack1] quit
# Configure Loopback 1 as a BSR and an RP for VPN instance a.
[CEa2] pim
[CEa2-pim] c-bsr 22.22.22.22
[CEa2-pim] c-rp 22.22.22.22
[CEa2-pim] quit
# Configure RIP.
[CEa2] rip 2
[CEa2-rip-2] network 10.0.0.0
[CEa2-rip-2] network 22.0.0.0
8. Configure CE a3:
# Enable IP multicast routing.
<CEa3> system-view
[CEa3] multicast routing
[CEa3-mrib] quit
# Assign an IP address to GigabitEthernet 2/1/1, and enable IGMP on the interface.
[CEa3] interface gigabitethernet 2/1/1
[CEa3-GigabitEthernet2/1/1] ip address 10.110.10.1 24
[CEa3-GigabitEthernet2/1/1] igmp enable
[CEa3-GigabitEthernet2/1/1] quit
# Assign an IP address to GigabitEthernet 2/1/2, and enable PIM-SM on the interface.
[CEa3] interface gigabitethernet 2/1/2
[CEa3-GigabitEthernet2/1/2] ip address 10.110.5.2 24
[CEa3-GigabitEthernet2/1/2] pim sm
[CEa3-GigabitEthernet2/1/2] quit
# Assign an IP address to GigabitEthernet 2/1/3, and enable PIM-SM on the interface.
[CEa3] interface gigabitethernet 2/1/3
[CEa3-GigabitEthernet2/1/3] ip address 10.110.12.2 24
[CEa3-GigabitEthernet2/1/3] pim sm
[CEa3-GigabitEthernet2/1/3] quit
# Configure RIP.
[CEa3] rip 2
[CEa3-rip-2] network 10.0.0.0
9. Configure CE b2:
To Next Page
Loading...
