HP MSR2003 User Manual

322
# On Router B, enable IPv6 multicast routing, and enable IPv6 PIM-SM on each interface.
<RouterB> system-view
[RouterB] ipv6 multicast routing
[RouterB-mrib6] quit
[RouterB] interface gigabitethernet 2/1/1
[RouterB-GigabitEthernet2/1/1] ipv6 pim sm
[RouterB-GigabitEthernet2/1/1] quit
[RouterB] interface gigabitethernet 2/1/2
[RouterB-GigabitEthernet2/1/2] ipv6 pim sm
[RouterB-GigabitEthernet2/1/2] quit
[RouterB] interface gigabitethernet 2/1/3
[RouterB-GigabitEthernet2/1/3] ipv6 pim sm
[RouterB-GigabitEthernet2/1/3] quit
[RouterB] interface gigabitethernet 2/1/4
[RouterB-GigabitEthernet2/1/4] ipv6 pim sm
[RouterB-GigabitEthernet2/1/4] quit
# Enable IPv6 multicast routing and IPv6 PIM-SM on Router C, Router D, Router F, Router G, and
Router H in the same way Router B is configured. (Details not shown.)
4. Configure IPv6 admin-scoped zone boundaries:
# On Router B, configure GigabitEthernet 2/1/3 and GigabitEthernet 2/1/4 as the boundaries
of IPv6 admin-scoped zone 1.
[RouterB] interface gigabitethernet 2/1/3
[RouterB-GigabitEthernet2/1/3] ipv6 multicast boundary scope 4
[RouterB-GigabitEthernet2/1/3] quit
[RouterB] interface gigabitethernet 2/1/4
[RouterB-GigabitEthernet2/1/4] ipv6 multicast boundary scope 4
[RouterB-GigabitEthernet2/1/4] quit
# On Router C, configure GigabitEthernet 2/1/4 and GigabitEthernet 2/1/5 as the boundaries
of IPv6 admin-scoped zone 2.
<RouterC> system-view
[RouterC] interface gigabitethernet 2/1/4
[RouterC-GigabitEthernet2/1/4] ipv6 multicast boundary scope 4
[RouterC-GigabitEthernet2/1/4] quit
[RouterC] interface gigabitethernet 2/1/5
[RouterC-GigabitEthernet2/1/5] ipv6 multicast boundary scope 4
[RouterC-GigabitEthernet2/1/5] quit
# On Router D, configure GigabitEthernet 2/1/3 as the boundary of IPv6 admin-scoped zone 2.
<RouterD> system-view
[RouterD] interface gigabitethernet 2/1/3
[RouterD-GigabitEthernet2/1/3] ipv6 multicast boundary scope 4
[RouterD-GigabitEthernet2/1/3] quit
5. Configure C-BSRs and C-RPs:
# On Router B, configure GigabitEthernet 2/1/2 as a C-BSR and a C-RP for IPv6 admin-scoped
zone 1.
[RouterB] ipv6 pim
[RouterB-pim6] c-bsr 1002::2 scope 4
[RouterB-pim6] c-rp 1002::2 scope 4

HP MSR2003 Specifications

General

Brand	HP
Model	MSR2003
Category	Network Router
Language	English