HP MSR2003

323
[RouterB-pim6] quit
# On Router D, configure GigabitEthernet 2/1/1 as a C-BSR and a C-RP for IPv6 admin-scoped
zone 2.
[RouterD] ipv6 pim
[RouterD-pim6] c-bsr 3003::2 scope 4
[RouterD-pim6] c-rp 3003::2 scope 4
[RouterD-pim6] quit
# On Router F, configure GigabitEthernet 2/1/1 as a C-BSR and a C-RP for the IPv6 global-scoped
zone.
<RouterF> system-view
[RouterF] ipv6 pim
[RouterF-pim6] c-bsr 8001::1
[RouterF-pim6] c-rp 8001::1
[RouterF-pim6] quit
Verifying the configuration
# Display BSR information on Router B.
[RouterB] display ipv6 pim bsr-info
Scope: non-scoped
State: Accept Preferred
Bootstrap timer: 00:01:25
Elected BSR address: 8001::1
Priority: 64
Hash mask length: 126
Uptime: 00:01:45
Scope: 4
State: Elected
Bootstrap timer: 00:00:06
Elected BSR address: 1002::2
Priority: 64
Hash mask length: 126
Uptime: 00:04:54
Candidate BSR address: 1002::2
Priority: 64
Hash mask length: 126
# Display BSR information on Router D.
[RouterD] display ipv6 pim bsr-info
Scope: non-scoped
State: Accept Preferred
Bootstrap timer: 00:01:25
Elected BSR address: 8001::1
Priority: 64
Hash mask length: 126
Uptime: 00:01:45
Scope: 4
State: Elected