6. Remove the roll (or the core, if only the core is left).
7. Close the locking levers on the left and right hubs.
8. Close the drawer.
Paper options
To see the paper options, press .
The following options are available:
●
Edit type: You can modify the type of paper loaded.
●
Protect paper types: You can protect selected paper types to avoid printing on them unintentionally.
Store paper
To maintain paper quality, follow these recommendations:
●
Store rolls in the original packaging within the temperature and humidity range specied on the paper
label.
●
When natural tracing paper is stored in a humid environment, its width when loaded can vary, and it may
even jam in the printer. To avoid this, store this kind of paper in its packaging in humid conditions.
Remove it from the printer in conditions of low temperature and high humidity (such as 15°C and 80%
relative humidity). If you see that the paper has been aected by humidity, cut o the beginning of the
roll: about 8 m (26 ft).
●
Store rolls covered by another piece of paper or cloth.
●
Allow all papers to adapt to room conditions, out of the packaging, for 24 hours before using them for
printing.
ENWW Paper options 33
To Next Page
Loading...
Need help?
General
Weight and Dimensions
