NOTE: If you edit a quickset after selecting a job, the changed settings are applied only to the current
job and are not saved permanently. You can change any of your own quicksets permanently by pressing
on the quicksets screen, or by pressing , then Print, Scan & Copy quicksets > Print from
USB quicksets
.
NOTE: The factory quicksets cannot be modied.
5. When you are satised with the quickset settings, press OK to continue.
6. A screen with the following settings appears: Copies, Page order, and Collate. You can check and change
them in this step, regardless of the settings in the quickset. Press Print to continue.
7. After printing, you can choose to print another le or go to the job queue. If you print another le
immediately without returning to the home screen, the temporary settings used for the previous le are
used again.
Print by email
After you have enabled Web Services, you can print to your printer by email. You can nd the printer's email
address from the front panel: press , then HP connected. Then send the le you want to print to that
email address as an attachment.
In this way, you can print from anywhere with an Internet connection, without needing any printer driver.
There are a few limitations that you should bear in mind:
●
The attached les to be printed must be in PDF, JPEG, or TIFF formats.
●
The maximum le size is 10 MB, but your email server may have a lower limit.
●
Files are printed in the original document size (at 100% scale), in normal quality, in color, and normally in
portrait orientation (some printers may oer autorotation).
Select print quality
The printer has three print-quality modes which have been designed, as their names indicate, to match the
specic needs of dierent kinds of images.
Although all print-quality modes are for 1-pass printing (in contrast to HP Designjet printers), several
parameters such as print speed, color strategy, and image processing have been optimized for each case.
Refer to the print-mode table and diagram below for guidance on selecting the most appropriate print mode
for your purposes.
If the image content is… Recommended print
mode
You will obtain…
A
Monochrome or color lines and text
Any content if maximum productivity is needed
Lines/Fast HIgh-quality lines with maximum productivity
B Large areas of uniform colors Uniform areas
More uniform and saturated colors for long-
distance viewing
C
Text or lines on top of color backgrounds
Highly complex drawings with plenty of detail
High detail
Smooth background with ne detail in lines and
text
80 Chapter 5 Sending a job to print ENWW
To Next Page
Loading...