1.
At the front panel, press , then , then Cleaning container > Replace.
2. Locate the cleaning container.
3. Extract the cleaning container: lift it a little, then pull it out.
TIP: If you leave the printer without a cleaning container for long, some drops of liquid may escape
and stain the oor. Try to replace it rapidly.
4. Remove the packaging from the new cleaning container.
5. Insert the new cleaning container in place of the old one.
NOTE: If you insert a cleaning container that has been used in another printer, the Almost full warning
will be unreliable.
6. The printer checks the installation.
7. Make sure that you comply with all applicable federal, state, and local regulations when disposing of ink
system consumables.
Cleaning container troubleshooting
If the cleaning container is correctly installed but the printer does not detect it, rst try taking it out and
putting it back again. If that fails, call your support representative.
Maintenance cartridge
The maintenance cartridge cleans and maintains the printheads, and stores waste ink.
The maintenance cartridge contains a roll of cloth, which is used to clean the printheads. It has a total
capacity of 500 wipes (cleaning operations). A heavy user will need to replace it about every 2 months.
60 Chapter 3 Ink system ENWW
To Next Page
Loading...