1. Ensure that all ink cartridges are at least 25% full.
2.
Start the printhead replacement from the front panel: press , then the Printhead tab, then
Replace.
3. Open the top stacker.
4. Wait for the printbar to reach the replacement position.
5. Open the top cover with both hands by pressing the side buttons.
6. Open the printbar cover.
7. Identify the printhead(s) that you want to replace.
NOTE: You can replace more than one printhead at a time.
8. Pull up the printhead handle.
ENWW Print bar 55
To Next Page
Loading...