Then, in the printing dialog, you will be able to select each predene or the default.
Recommended settings for folding jobs:
◦
Clip content by margin: To avoid printing in the margins and fold properly. From the Paper/Quality
tab, select Margins/Layout > Clip content by margin.
◦
Right-alignment: To ensure that the block title is in the correct position when folding. Select this in
the Layout/Output tab.
◦
Portrait orientation: Select this in the Layout/Output tab.
There are some paper types that are not supported by the folder. You will see a warning if you try to
send such a paper type to the folder.
92 Chapter 7 Collection and nishing ENWW