HP Z600

Deleting RAID volumes
Use the LSI Logic Corporation Configuration Utility to delete SAS RAID volumes.
1. Start the LSI Corporation Configuration Utility. During BIOS start up, you are prompted to Press
Ctrl-C to start LSI Corp. Configuration Utility.
2. On the Main menu of the BIOS-based configuration utility, use the arrow keys to select an adapter.
3. Press Enter to go to the Adapter Properties screen.
4. In the Select New Array Type screen, use the arrow keys to select New Existing Array.
5. In the View Array screen, use the arrow keys to select Manage Array. Press Enter.
6. In the Manage Array screen, use the arrow keys to select Delete Array. Press Enter.
Press Y to delete the array and exit to the adapter properties screen.
192 Chapter 7 Configuring RAID devices ENWW