EasyManuals Logo

HP Z600 User Manual

HP Z600
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
Grounding the work area
To prevent static damage in the work area:
Cover the work surface with approved static-dissipative material. Use a wrist strap connected to
the work surface, and properly grounded tools and equipment.
Use static-dissipative mats, foot straps, or air ionizers to give added protection.
Handle electrostatic-sensitive components, parts, and assemblies by the case or PCB laminate.
Handle them only in static-free work areas.
Disconnect power and input signals before inserting and removing connectors or test equipment.
Use fixtures made of static-safe materials when fixtures must directly contact dissipative surfaces.
Keep work area free of nonconductive materials, such as plastic assembly aids and Styrofoam.
Use field service tools (such as cutters, screwdrivers, and vacuums) that are conductive.
Recommended ESD prevention materials and equipment
The recommended materials and equipment are:
Antistatic tape
Antistatic smocks, aprons, and sleeve protectors
Conductive bins and other assembly or soldering aids
Conductive foam
Conductive tabletop workstations with a ground cord of one megohm ± 10% resistance
Static-dissipative table or floor mats with a hard-tie to ground
Field service kits
Static awareness labels
Wrist straps and footwear straps providing one megohm ± 10% resistance
Material-handling packages
Conductive plastic bags
Conductive plastic tubes
Conductive tote boxes
Opaque shielding bags
Transparent metallized shielding bags
Transparent shielding tubes
66 Chapter 5 Replacing components ENWW

Table of Contents

Other manuals for HP Z600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Z600 and is the answer not in the manual?

HP Z600 Specifications

General IconGeneral
Tcase76 °C
Bus typeQPI
SteppingD0
FSB ParityNo
Processor cache4 MB
Processor cores4
Processor modelE5504
System bus rate4.8 GT/s
Processor seriesIntel Xeon 5500 Series
Processor socketSocket B (LGA 1366)
Processor codenameNehalem EP
Number of QPI links2
Processor frequency2 GHz
Processor cache typeSmart Cache
Processor lithography45 nm
Processor system typeDP
Processor manufacturerIntel
Processor front side bus- MHz
Processor operating modes64-bit
ECC supported by processorYes
Thermal Design Power (TDP)80 W
Number of processors installed1
CPU multiplier (bus/core ratio)15
Memory types supported by processorDDR3-SDRAM
Memory clock speeds supported by processor800 MHz
Memory bandwidth supported by processor (max)19.2 GB/s
Maximum internal memory supported by processor144 GB
Audio systemIntegrated High Definition Realtek ALC262 Audio, optional Creative X-Fi Titanium PCIe Audio Card, optional HP Thin USB Powered Speakers
Product typeWorkstation
Motherboard chipsetIntel® 5520
Internal memory1 GB
Memory channelsTriple-channel
Memory clock speed1333 MHz
Maximum internal memory24 GB
Memory layout (slots x size)1 x 1 GB
HDD speed7200 RPM
HDD capacity250 GB
HDD interfaceSATA
Optical drive typeDVD Super Multi
I/O portsFront: 3 USB 2.0, 1 microphone in, 1 headphone out, optional 1 IEEE 1394a; Rear: 6 USB 2.0, 1 audio in, 1 audio out, 1 microphone in, 2 PS/2, 1 RJ-45 to integrated Gigabit LAN, optional 1 serial; Internal: 3 USB 2.0
Serial ports quantity0
USB 2.0 ports quantity9
Power supply650 W
DisplayHP LP1965 19-inch LCD Monitor, HP LP2065 20-inch LCD Monitor, HP LP2275w 22-inch Widescreen LCD Monitor, HP LP2475w 24-inch Widescreen LCD Monitor, HP DreamColor LP2480zx Professional Display (24-inch widescreen), HP LP3065 30-inch Widescreen LCD Monitor (all sold separately)
Drive bays2 external 5.25\
Graphics card-
Keyboard typeHP PS/2 Standard Keyboard
Expansion slots2 PCI Express Gen2 x16, 1 PCI Express Gen2 (x8 mechanically, x4 electrically), 1 PCI Express Gen1 (x8 mechanically, x4 electrically), 2 PCI
Pointing deviceHP USB Laser Scroll Mouse
Power requirements650 watts wide-ranging, active Power Factor Correction, 85% efficient Power Supply
Storage drive type250 GB 7200 rpm SATA NCQ SATA 250 GB
HDD controller typeSATA (10000 rpm) SATA (7200 rpm) SAS (15000 rpm)
Video card featuresNo integrated Graphic Card
Maximum HDD capacity600 GB
Storage drive controllerIntegrated 6 channel SATA 3 Gb/s controller with RAID (0, 1, 5 or 10) capability, optional SAS controller, LSI 3041E 4-port SAS/SATA, with RAID (0, 1 or 10) capability
Minimum storage drive space146 GB
Non-operating altitude9100 m
Storage temperature (T-T)-40 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)8 - 90 %
Operating relative humidity (H-H)8 - 85 %
Operating system installedWindows Vista Business
Compatible operating systemsRed Hat Enterprise Linux WS 5 64-bit, Novell Suse SLED 11
Maximum graphics card memory0.032 GB
Chassis typeMini Tower
Country of originChina
Processor codeSLBF9
Processor ARK ID40711
Processor package size42.5 x 45 mm
Weight and Dimensions IconWeight and Dimensions
Depth440 mm
Width165.3 mm
Height445.1 mm
Weight19000 g

Related product manuals