System fans
This workstation includes:
●
Two rear system fans
●
One front system fan
●
One CPU0 heatsink fan
●
One CPU1 heatsink fan
●
Two power supply fans
●
One memory fan
A front system fan is included for special environments, and some graphics cards include onboard fans.
In addition, there is one fan per CPU heatsink for a standard CPU heatsink.
Resetting the power supply
If an overload triggers the power supply overload protection, power is immediately disconnected.
To reset the power supply:
1. Disconnect the power cord from the workstation.
2. Determine what caused the overload and fix the problem. For troubleshooting information, see
Diagnostics and troubleshooting on page 150.
3. Reconnect the power cord and restart the workstation.
When you power off the workstation through the operating system, power consumption falls below what
is considered low power consumption but does not reach zero. This low power consumption feature
extends the life of the power supply.
Ensuring proper ventilation
Proper ventilation for the system is important for workstation operation. Follow these guidelines to
ensure adequate ventilation:
●
Operate the workstation on a sturdy, level surface.
12 Chapter 1 Workstation overview ENWW
To Next Page
Loading...
