HPE 5900 series

101
Related commands
ip address bootp-alloc
ip address bootp-alloc
Use ip address bootp-alloc to configure an interface to use BOOTP for IP address acquisition.
Use undo ip address bootp-alloc to cancel an interface from using BOOTP.
Syntax
ip address bootp-alloc
undo ip address bootp-alloc
Default
An interface does not use BOOTP for IP address acquisition.
Views
Interface view
Predefined user roles
network-admin
Examples
# Configure VLAN-interface 10 to use BOOTP for IP address acquisition.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ip address bootp-alloc
Related commands
display bootp client