HPE 5900 series

226
local-proxy-nd enable
undo local-proxy-nd enable
Default
Local ND proxy is disabled.
Views
VLAN interface view, Layer 3 Ethernet interface view, Layer 3 Ethernet subinterface view
Predefined user roles
network-admin
Examples
# Enable local ND proxy on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] local-proxy-nd enable
Related commands
proxy-nd enable
proxy-nd enable
Use proxy-nd enable to enable common ND proxy.
Use undo proxy-nd enable to restore the default.
Syntax
proxy-nd enable
undo proxy-nd enable
Default
Common ND proxy is disabled.
Views
VLAN interface view, Layer 3 Ethernet interface view, Layer 3 Ethernet subinterface view
Predefined user roles
network-admin
Examples
# Enable common ND proxy on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] proxy-nd enable
Related commands
local-proxy-nd enable
reset ipv6 neighbors
Use reset ipv6 neighbors to clear IPv6 neighbor information.