HPE 5900 series

48
dns-list
Use dns-list to specify DNS server addresses in a DHCP address pool.
Use undo dns-list to remove DNS server addresses from a DHCP address pool.
Syntax
dns-list ip-address&<1-8>
undo dns-list [ ip-address&<1-8> ]
Default
No DNS server address is specified.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
ip-address&<1-8>: Specifies DNS servers. &<1-8> indicates that you can specify up to eight DNS
server addresses separated by spaces.
Usage guidelines
If you use the dns-list command multiple times, the most recent configuration takes effect.
If you do not specify any parameters, the undo dns-list command deletes all DNS server addresses
in the DHCP address pool.
Examples
# Specify the DNS server address 10.1.1.254 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] dns-list 10.1.1.254
Related commands
display dhcp server pool
domain-name
Use domain-name to specify a domain name in a DHCP address pool.
Use undo domain-name to remove the specified domain name.
Syntax
domain-name domain-name
undo domain-name
Default
No domain name is specified.
Views
DHCP address pool view
Predefined user roles
network-admin