HPE 5900 series

269
Related commands
display ipv6 dhcp client statistics
DHCPv6 snooping commands
DHCPv6 snooping works between the DHCPv6 client and the DHCPv6 server or between the
DHCPv6 client and DHCPv6 the relay agent. DHCPv6 snooping does not work between the
DHCPv6 server and the DHCPv6 relay agent.
display ipv6 dhcp snooping binding
Use display ipv6 dhcp snooping binding to display DHCPv6 snooping entries.
Syntax
display ipv6 dhcp snooping binding [ address ipv6-address [ vlan vlan-id ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
address ipv6-address: Displays the DHCPv6 snooping entry for the specified IPv6 address.
vlan vlan-id: Specifies the ID of the VLAN where the IPv6 address resides.
Usage guidelines
If you do not specify any parameters, this command displays all DHCPv6 snooping entries.
Examples
# Display all DHCPv6 snooping entries.
<Sysname> display ipv6 dhcp snooping binding
1 DHCPv6 snooping entries found.
IPv6 address MAC address Lease VLAN SVLAN Interface
================ ============== =========== ==== ===== ========================
2::1 00e0-fc00-0006 54 2 N/A Ten-GigabitEthernet1/0/1
Table 66 Command output
Field
Description
IPv6 Address IPv6 address assigned to the DHCPv6 client.
MAC Address MAC address of the DHCPv6 client.
Lease Remaining lease duration in seconds.
VLAN
When both DHCPv6 snooping and QinQ are enabled or the DHCPv6
packet contains two VLAN tags, this field identifies the outer VLAN tag.
Otherwise, it identifies the VLAN where the port connecting the DHCPv6
client resides.
SVLAN
When both DHCPv6 snooping and QinQ are enabled or the DHCPv6
packet contains two VLAN tags, this field identifies the inner VLAN tag.
Otherwise, it displays
N/A
.