HPE 5900 series

243
Usage guidelines
You can use the dns-server command to specify up to eight DNS servers in an address pool. A DNS
server specified earlier has a higher preference.
Examples
# Specify the DNS server address 2:2::3 in DHCPv6 address pool 1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] dns-server 2:2::3
Related commands
display ipv6 dhcp pool
domain-name
Use domain-name to specify a domain name suffix in a DHCPv6 address pool.
Use undo domain-name to remove the domain name suffix.
Syntax
domain-name domain-name
undo domain-name
Default
No domain name suffix is specified.
Views
DHCPv6 address pool view
Predefined user roles
network-admin
Parameters
domain-name: Specifies a domain name suffix, a case-insensitive string of 1 to 50 characters.
Usage guidelines
You can configure only one domain name suffix in an address pool.
If you use the domain-name command multiple times, the most recent configuration takes effect.
Examples
# Specify the domain name aaa.com in DHCPv6 address pool 1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] domain-name aaa.com
Related commands
display ipv6 dhcp pool
ipv6 dhcp pool
Use ipv6 dhcp pool to create a DHCPv6 address pool and enter its view.
Use undo ipv6 dhcp pool to remove the specified DHCPv6 address pool.