175
Table 40 Command output
Destination count Total number of destination addresses.
FIB entry count Total number of IPv6 FIB entries.
Destination Destination address.
Prefix length Prefix length of the destination address.
Nexthop Next hop.
Flags
Route flag:
• U—Usable route.
• G—Gateway route.
• H—Host route.
• B—Black hole route.
• D—Dynamic route.
• S—Static route.
• R—Recursive route.
• F—Fast re-route.
Time stamp Time when the IPv6 FIB entry was generated.
Label Inner MPLS label.
Interface Outgoing interface.
Token Label switched path index number.
display ipv6 icmp statistics
Use display ipv6 icmp statistics to display ICMPv6 packet statistics.
Syntax
Centralized devices:
display ipv6 icmp statistics [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number.
Usage guidelines
This command displays statistics about received and sent ICMPv6 packets.
Examples
# Display ICMPv6 packet statistics.
<Sysname> display ipv6 icmp statistics
Input: bad code 0 too short 0
To Next Page
Loading...
