260
Table 63 Command output
Packets dropped Number of discarded packets.
Packets received Number of received packets.
Solicit Number of received solicit packets.
Request Number of received request packets.
Confirm Number of received confirm packets.
Renew Number of received renew packets.
Rebind Number of received rebind packets.
Release Number of received release packets.
Decline Number of received decline packets.
Information-request Number of received information request packets.
Relay-forward Number of received relay-forward packets.
Relay-reply Number of received relay-reply packets.
Packets sent Number of sent packets.
Advertise Number of sent advertise packets.
Reconfigure Number of sent reconfigure packets.
Reply Number of sent reply packets.
Relay-forward Number of sent Relay-forward packets.
Relay-reply Number of sent Relay-reply packets.
Related commands
reset ipv6 dhcp relay statistics
ipv6 dhcp relay server-address
Use ipv6 dhcp relay server-address to specify a DHCPv6 server on the DHCPv6 relay agent.
Use undo ipv6 dhcp relay server-address to remove DHCPv6 server addresses.
Syntax
ipv6 dhcp relay server-address ipv6-address [ interface interface-type interface-number ]
undo ipv6 dhcp relay server-address [ ipv6-address [ interface interface-type interface-number ] ]
Default
No DHCPv6 server address is specified on the DHCPv6 relay agent.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the IPv6 address of a DHCPv6 server.
To Next Page
Loading...
