HPE 5900 series

286
Field Description
If the output interface does not exist, this field displays a hyphen (-).
Related commands
reset ipv6 fast-forwarding cache
ipv6 fast-forwarding aging-time
Use ipv6 fast-forwarding aging-time to set the aging time of IPv6 fast forwarding entries.
Use undo ipv6 fast-forwarding aging-time to restore the default.
Syntax
ipv6 fast-forwarding aging-time aging-time
undo ipv6 fast-forwarding aging-time
Default
The aging time of IPv6 fast forwarding entries is 30 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
aging-time: Sets the aging time for IPv6 fast forwarding entries, in the range of 10 to 300 seconds.
Examples
# Set the aging time for IPv6 fast forwarding entries to 20 seconds.
<Sysname> system-view
[Sysname] ipv6 fast-forwarding aging-time 20
Related commands
display ipv6 fast-forwarding aging-time
ipv6 fast-forwarding load-sharing
Use ipv6 fast-forwarding load-sharing to enable IPv6 fast-forwarding load sharing.
Use undo ipv6 fast-forwarding load-sharing to disable IPv6 fast-forwarding load sharing.
Syntax
ipv6 fast-forwarding load-sharing
undo ipv6 fast-forwarding load-sharing
Default
IPv6 fast-forwarding load sharing is enabled.
Views
System view