HPE 5900 series

201
Examples
# Set the IPv6 anycast address of VLAN-interface 100 to 2001::1 with prefix length 64.
Method 1:
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address 2001::1/64 anycast
Method 2:
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address 2001::1 64 anycast
ipv6 address auto
Use ipv6 address auto to enable the stateless address autoconfiguration function on an interface,
so that the interface can automatically generate a global unicast address.
Use undo ipv6 address auto to disable this function.
Syntax
ipv6 address auto
undo ipv6 address auto
Default
The stateless address autoconfiguration function is disabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
After a global unicast address is generated through stateless autoconfiguration, a link-local address
is generated automatically.
To remove the global unicast address and the link-local address that are automatically generated,
use the undo ipv6 address auto command or the undo ipv6 address command.
Examples
# Enable stateless address autoconfiguration on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address auto
ipv6 address auto link-local
Use ipv6 address auto link-local to automatically generate a link-local address for an interface.
Use undo ipv6 address auto link-local to remove the automatically generated link-local address
for the interface.
Syntax
ipv6 address auto link-local