HPE 5900 series

167
Examples
# Set the TCP FIN wait timer to 800 seconds.
<Sysname> system-view
[Sysname] tcp timer fin-timeout 800
tcp timer syn-timeout
Use tcp timer syn-timeout to configure the TCP SYN wait timer.
Use undo tcp timer syn-timeout to restore the default.
Syntax
tcp timer syn-timeout time-value
undo tcp timer syn-timeout
Default
The TCP SYN wait timer is 75 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time-value: Specifies the TCP SYN wait timer in the range of 2 to 600 seconds.
Usage guidelines
TCP starts the SYN wait timer after sending a SYN packet. If no response packet is received within
the SYN wait timer interval, TCP fails to establish the connection.
Examples
# Set the TCP SYN wait timer to 80 seconds.
<Sysname> system-view
[Sysname] tcp timer syn-timeout 80
tcp window
Use tcp window to configure the size of the TCP receive/send buffer.
Use undo tcp window to restore the default.
Syntax
tcp window window-size
undo tcp window
Default
The size of the TCP receive/send buffer is 64 KB.
Views
System view
Predefined user roles
network-admin