HPE 5900 series

73
Total number of temporary items: 1
IP address MAC address Type Interface VPN name
10.1.1.1 00e0-0000-0001 Dynamic Vlan1 VPN1
10.1.1.5 00e0-0000-0000 Temporary Vlan2 VPN2
Table 13 Command output
Field
Description
Total number of client-information items Total number of relay entries.
Total number of dynamic items Total number of dynamic relay entries.
Total number of temporary items Total number of temporary relay entries.
IP address IP address of the DHCP client.
MAC address MAC address of the DHCP client.
Type
Relay entry type:
• Dynamic—The relay agent creates a dynamic relay entry
upon receiving an ACK response from the DHCP server.
• Temporary—The relay agent creates a temporary relay
entry upon receiving a REQUEST packet from a DHCP
client.
Interface
Layer 3 interface connected to the DHCP client.
N/A
is
displayed for relay entries without interface information.
Related commands
dhcp relay client-information record
reset dhcp relay client-information
display dhcp relay information
Use display dhcp relay information to display Option 82 configuration information for the DHCP
relay agent.
Syntax
display dhcp relay information [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays Option 82 configuration information for the
specified interface. If you do not specify an interface, this command displays Option 82 configuration
information about all interfaces.
Examples
# Display Option 82 configuration information for all interfaces.
<Sysname> display dhcp relay information
Interface: Vlan-interface100
Status: Enable