HPE 5900 series

75
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays DHCP server addresses on the specified
interface. If you do not specify an interface, this command displays DHCP server addresses on all
interfaces operating in DHCP relay agent mode.
Examples
# Display DHCP server addresses on all interfaces.
<Sysname> display dhcp relay server-address
Interface name Server IP address
Vlan1 2.2.2.2
Table 15 Command output
Field
Description
Interface name Interface name.
Server IP address DHCP server IP address.
Related commands
dhcp relay server-address
display dhcp relay statistics
Use display dhcp relay statistics to display DHCP packet statistics on the DHCP relay agent.
Syntax
display dhcp relay statistics [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays DHCP packet statistics on the specified
interface. If you do not specify an interface, this command displays all DHCP packet statistics on the
DHCP relay agent.
Examples
# Display all DHCP packet statistics on the DHCP relay agent.
<Sysname> display dhcp relay statistics
DHCP packets dropped: 0
DHCP packets received from clients: 0
DHCPDISCOVER: 0
DHCPREQUEST: 0
DHCPINFORM: 0
DHCPRELEASE: 0