HPE 5900 series

171
Examples
# Configure UDP helper to convert received broadcast packets on VLAN-interface 100 to multicast
packets destined for 225.0.0.1.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-vlan-interface 100] udp-helper broadcast-map 225.0.0.1
udp-helper enable
Use udp-helper enable to enable UDP helper.
Use undo udp-helper enable to disable UDP helper.
Syntax
udp-helper enable
undo udp-helper enable
Default
UDP helper is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
UDP helper takes effect when you use the udp-helper enable command with the udp-helper port
command and at least one of the following commands:
•
udp-helper server
•
udp-helper broadcast-map
Examples
# Enable UDP helper.
<Sysname> system-view
[Sysname] udp-helper enable
Related commands
udp-helper port
udp-helper server
udp-helper broadcast-map
udp-helper port
Use udp-helper port to specify a UDP port number for UDP helper.
Use undo udp-helper port to remove UDP port numbers.
Syntax
udp-helper port { port-number | dns | netbios-ds | netbios-ns | tacacs | tftp | time }
undo udp-helper port { port-number | dns | netbios-ds | netbios-ns | tacacs | tftp | time }