HPE 5900 series

19
Usage guidelines
If you do not specify any keywords or arguments, the command displays all ARP snooping entries.
Examples
# Display ARP snooping entries for VLAN 2.
<Sysname> display arp snooping vlan 2
IP Address MAC Address VLAN ID Interface Aging Status
3.3.3.3 0003-0003-0003 2 XGE1/0/1 20 Valid
3.3.3.4 0004-0004-0004 2 XGE1/0/2 5 Invalid
# Display the number of the current ARP snooping entries.
<Sysname> display arp snooping count
Total entries: 2
Table 2 Command output
Field
Description
IP Address IP address in an ARP snooping entry.
MAC Address MAC address in an ARP snooping entry.
VLAN ID ID of the VLAN to which the ARP snooping entry belongs.
Interface Input interface in an ARP snooping entry.
Aging Aging time for an ARP snooping entry in minutes.
Status
Status of an ARP snooping entry:
Valid
,
Invalid
,
Collision
.
Total entries Number of ARP snooping entries.
Related commands
reset arp snooping
reset arp snooping
Use reset arp snooping to remove ARP snooping entries.
Syntax
reset arp snooping [ ip ip-address | vlan vlan-id ]
Views
User view
Predefined user roles
network-admin
Parameters
ip ip-address: Removes the ARP entry for the specified IP address.
vlan vlan-id: Removes the ARP entries for the specified VLAN. The vlan-id argument is in the range
of 1 to 4094.
Usage guidelines
If you do not specify any keywords or arguments, the command removes all ARP snooping entries.
Examples
# Remove ARP snooping entries for VLAN 2.