HPE 5900 series

180
Table 42 Command output
Field
Description
*down: administratively
down
The interface has been administratively shut down by using the
shutdown
command.
(s): spoofing
Spoofing attribute of the interface.
The link protocol state of the interface is up, but the link is temporarily
established on demand or does not exist.
Interface Name of the interface.
Physical
Physical state of the interface:
• *down—The interface has been shut down by using the shutdown
command.
• down—The interface is up but its physical state is down because all ports
in the VLAN are down.
• up—The administrative and physical states of the interface are both up.
Protocol
Link layer protocol state of the interface:
• down—The network layer protocol state of the interface is down.
•
up
—The network layer protocol state of the interface is up.
IPv6 Address
IPv6 address of the interface.
•
If at least one global unicast address is configured, this field displays the
lowest address.
• If no global unicast address is configured, this field displays the link-local
address.
• If no address is configured, this field displays Unassigned.
display ipv6 interface prefix
Use display ipv6 interface prefix to display IPv6 prefix information for an interface.
Syntax
display ipv6 interface interface-type interface-number prefix
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Examples
# Display IPv6 prefix information for VLAN-interface 10.
<Sysname> display ipv6 interface vlan-interface10 prefix
Prefix: 1001::/65 Origin: ADDRESS
Age: - Flag: AL
Lifetime(Valid/Preferred): 2592000/604800
Prefix: 2001::/64 Origin: STATIC
Age: - Flag: L