HPE 5900 series

227
Syntax
reset ipv6 neighbors { all | dynamic | interface interface-type interface-number | slot slot-number
| static }
Views
User view
Predefined user roles
network-admin
Parameters
all: Clears static and dynamic neighbor information for all interfaces.
dynamic: Clears dynamic neighbor information for all interfaces.
interface interface-type interface-number: Specifies an interface by its type and name.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number.
static: Clears static neighbor information for all interfaces.
Usage guidelines
You can use the display ipv6 neighbors command to display IPv6 neighbor information.
Examples
# Clear neighbor information for all interfaces.
<Sysname> reset ipv6 neighbors all
This will delete all the entries. Continue? [Y/N]:Y
# Clear dynamic neighbor information for all interfaces.
<Sysname> reset ipv6 neighbors dynamic
This will delete all the dynamic entries. Continue? [Y/N]:Y
Related commands
display ipv6 neighbors
ipv6 neighbor
reset ipv6 pathmtu
Use reset ipv6 pathmtu to clear the Path MTU information.
Syntax
reset ipv6 pathmtu { all | dynamic | static }
Views
User view
Predefined user roles
network-admin
Parameters
all: Clears all Path MTUs.
dynamic: Clears all dynamic Path MTUs.
static: Clears all static Path MTUs.